zimaboard

ip link set enp3s0 promisc on

docker network create -d macvlan --subnet=192.168.1.0/24 --gateway=192.168.1.1 -o parent=enp3s0 macnet

cat > /etc/openwrt/network <<EOF
config interface 'loopback'
        option ifname 'lo'
        option proto 'static'
        option ipaddr '127.0.0.1'
        option netmask '255.0.0.0'

config globals 'globals'
        option packet_steering '1'

config interface 'lan'
        option type 'bridge'
        option ifname 'enp3s0'
        option proto 'static'
        option ipaddr '192.168.1.77'
        option netmask '255.255.255.0'
        option ip6assign '60'
        option gateway '192.168.1.1'
        option broadcast '192.168.1.255'
        option dns '192.168.1.1'

config interface 'vpn0'
        option ifname 'tun0'
        option proto 'none'
EOF

docker run --restart always -d  --ip 192.168.1.77 --name openwrt -v /etc/openwrt/network:/etc/config/network --network macnet --privileged registry.cn-shanghai.aliyuncs.com/suling/openwrt:x86_64 /sbin/init

ip link add mynet link enp3s0 type macvlan mode bridge
ip addr add 192.168.1.63 dev mynet
ip link set mynet up
ip route add 192.168.1.79 dev mynet

cat <<EOF >/etc/rc.local
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.

# 设置网卡混杂模式
ip link set enp3s0 promisc on

# 添加 macvlan 网卡和路由 在宿主机直接访问 openwrt
ip link add mynet link enp3s0 type macvlan mode bridge
ip addr add 192.168.1.63 dev mynet
ip link set mynet up
ip route add 192.168.1.79 dev mynet

exit 0
EOF

chmod +x /etc/rc.local

systemctl enable --now rc-local